BK-400 Rubberized Crack Seal Machine
Simple rugged design that has been a time tested.
The "ALL-DIESEL" logo on the machines shown in
this brochure is your assurance of the safety and
convenience of single-fuel operation. No gasoline,
propane, or other in flammables are needed.
Rugged, dependable 3-cylinder diesel
engine provides power for KRACKER
hydraulic and electrical systems.
Forced Heat Transfer Oil Circulation
All KRACKER machines include a closed indirect heating system with absolute flow control. This exclusive feature raises cold sealant to application temperature in as little as 1 hour for most materials.
BENEFITS ON THE JOB SITE: * Quick startup. Idle crew time is kept to a minimum while waiting for sealant to heat. * More production per shift. The greater heating capability and efficiency of the KRACKER'" system means higher work output per hour on every job.
Easy Load Doors
Two sealant loading doors, 44 inches above
ground level, are easily reached from either
side of the machine. Door safety latches
comply with D.O.T. regulations for Elevated
Temperature re Materials.
Operating controls are centrally located at the rear of the machine for quick, convenient access on the job. Within easy reach at any time are: • Sealant circulation valves • Pump control • Burner controls (note operating and safety instructions on control box lid) • Application wand • Tank valve • Temperature gauges • Auger control
Enclosed high pressure diesel burner with automatic ignition virtually eliminates chance of fire or explosion.
The Hose Boom relieves the operator of the wieght of the hose while helping to minimize wear from dragging on the ground.
Heated Hose Storage Box
Hose is warmed during initial heatup in the Storage box.
With BearCat's environmentally compatible flush free system, no solvent flushing is needed at the end of a shift. There is no need to carry solvents on board the KRACKER further enhancing the over-all operational safety of these machines.
Tempurature Control Panel is convenient and simple to operate.
Set the desired product tempurature and unit controls burner to achieve and maintain desired tempurature.
BK-250 Crack Sealer Specifications
Sealant tank, max gals 350
Diesel fuel, gals 35
Hydraulic, gals 35
Sealant Heating System
Heating time, ambient to 375°F, in minutes 45 to 60 (Note 1)
Heat input, BTU/hr Melting Rate 425,000 (Note 1)
Tank openings, inches, 21W x 36L.
Engine, 3-cylinder diesel.
Tires, 9.50 x 16 (E).
Suspension, Rubber torsion axles.
Brakes: standard Electric, optional Hydraulic surge type.
Lights Comply with applicable Federal Motor Carriers regulations
Dry weight, lbs, 5700
Gross weight, lbs (Note 2) 8700
Depending on your needs, you may choose one of the standard All-Diesel machines described in this brochure, or a larger capacity, up to truck-mounted sizes. Propane-fueled Versions are also available. Whatever your choice, you tan be sure your KRACKER is built with BearCat's advanced engineering and rugged construction. BearCat quality and solid design are respected throughout the highway maintenance industry around the world. That is your assurance of dependable production on job after job in the years ahead. The exclusive KRACKER heating system provides usable sealant in as little as one hour after a cold start. Your crews no longer need to waste valuable and expensive production hours while waiting for sealant to heat. Add the time saved at end-of-shift with the FLUSH-FREE system. and you can see how a BearCat KRACKER will quickly add many man-days to your production schedule.